Howto flash stock firmware for huawei phone
before, you must download and install full driver for phone huawei.
We’ve been colleces and check the following ways to install the original ROM for Huawei phone.
has many many methods for working, but they will will share to a few ways to make possible.
See more:
You choose options for a one method below here:
Method 1:
Local update (most HW phones can use this way)
– Step 1: Copy the “dload / UPDATE.APP” directory to the SD Card.
– Step 2: Go to Settings / Settings -> select Updates -> Select “Local update” -> Confirm -> Done.
– After this step the phone automatically reboots and enters the software update mode from the memory card.
Wait a few minutes to install 100% is done.
II. Method 2:
Key string update (most new model phones can apply)
– Step 1: Copy the “dload / UPDATE.APP” folder to the SD Card.
– Step 2: Select Phone dialer / Dialer> Enter one of the following:
a. * # * # 2846579 # * # *
(or)
b. * # * # 14789632 # * # *
(or)
c. * # * # 1673495 # * # *.
– The phone will receive a sequence with the update interface
– Select ProjectMenu -> Select Upgrade -> Select SD card update -> Select Confirm
– After this step the phone automatically reboots and enters the software update mode from the memory card. 100% is done.
III. Method 3:
Force update (Most Huawei devices support this feature)
– Step 1. Copy the “dload / UPDATE.APP” folder to the SD Card.
– Step 2. Turn off the phone power -> Press and hold simultaneously (10 seconds) 3 keys: Volume Up + Volume Down +
– Notice the phone vibrates.
– Results: The phone automatically enters update mode from the memory card (no further action required).
– Wait 1-2 minutes (100%) and finish -> can experience new rom.
IV. Method 4:
USB update (Update via USB by software tools, low life line required this way: Y625, Y541, Scale …)
- 1. First tool :
“SP_Flash_Tool_exe_v3.1324.0.177_Secboot”:
Step 1: Download the software and extract the folder:
“SP_Flash_Tool_exe_v3.1324.0.177_Secboot”
Step 2: Run “Flash_tool.exe”
Step 3: Download Agent, select “MTK_AllInOne_DA.bin” inside the “SP_Flash_Tool_exe_v3.1324.0.177_Secboot” folder.
Step 4: Scatter-loading select the path to the ROM you want to up (USB_upgrade) and select file “MT6582_Android_scatter.txt”.
Step 5: Select all items below
Step 6: To start up the ROM, turn off the phone power and connect to the computer. Click “Download”
– Press and hold Volume – and connect the cable.
– Wait until the software shows a blue PASS, you can unplug the USB cable and experience a new ROM.
- 2. tool “EMMC”:
Step 1. Download and open the folder: “HQXA_CustomerDL_EMMC_V1.8”
Step 2: Run “ets.startrun.exe” we have the program interface:
Step 3:
– Select File -> Select “Config & Settings” -> Change the pathfile by the path to the ROM to up.
– Click “USB device manager” -> Find COM port with connection “USB_xxxx”
– Press “Port setting” -> “Thrd1” port select “USB_xxxx” as “USB device manager” above. Click Ok to close the installation.
Step 4: To start up the ROM, turn off the phone power and connect to the computer
– Press “Start all” to start up the new ROM. Wait and wait to experience the latest ROM.
– Press and hold Volume – and connect the cable.
– Wait until the software shows a blue PASS, you can unplug the USB cable and experience a new ROM.
- 3. tool Erase Tool:
(Use when phone does not recognize ROM for up):
Step 1. Turn on the computer and make sure “USB troubleshooting”
Step 2: Download the tool by path and extract, run erase.batch file -> Press Enter -> machine restart is okay.
Step 3: Up ROM as usual
V. Method 5: Use Huawei Smartphone Multi-Download Software:
- Download Huawei Smartphone Multi-Download Software
- Follow Full Guide: How to use Huawei Smartphone Multi Download Software
P / S: The purpose of this tool is to remove the right to ban software vendor interference (a form of Root).
#Howto flash stock firmware for huawei phone